Mold Services in Tallahassee, FL

On this page: Start here · Water damage and mold · Remediation · Testing and inspection · Removal and cleanup · Attic, crawl space and HVAC mold · Before you hire · Request to finished job · FAQ

Water damage and mold after a Tallahassee storm or leak

Summer thunderstorms, tropical systems and falling limbs all send water into Tallahassee homes, and the city's heavy tree cover means roofs and gutters stay damp longer than most owners realize. Wet drywall, insulation and flooring can begin growing mold in about a day or two if they are not dried. The same goes for a failed supply line, a leaking water heater or a dishwasher or AC drain that backed up.

If water is still entering the home, deal with that first. Call a water-damage company, and use emergency services or the utility for electrical, gas or sewage hazards. When you send us a request, note what happened, when it happened and whether the area has been dried or is still wet. We will route it to companies that do water mitigation alongside mold. Floodwater and sewage need extra precautions, so mention those too.

Read the full guide: water damage and mold in Tallahassee.

Mold remediation: what the work includes

Remediation means isolating the affected area, taking out materials that are too far gone to clean, cleaning and drying what stays, and addressing the cause. Crews usually use plastic containment and air filtration so spores are not pushed into the rest of the house. The job ends with a check that the area is dry and the visible growth is gone.

Ask each company for a written scope and a price before any work starts, and keep both. A reliable plan names the rooms, the materials to be removed and what happens if more mold is found behind a wall.

• Confirm the remediator license on MyFloridaLicense.com.
• Ask whether a separate company wrote the mold assessment.
• Ask how the moisture source will be fixed, not just the mold.

Mold testing and inspection in Leon County

An assessment gives you information instead of a guess. A licensed assessor inspects the property, may take air or surface samples, and writes a report with findings and a recommended scope. It is a good first step when there is a musty smell with nothing visible, when a past leak was never fully dried, or when you want a neutral opinion before you ask for remediation bids.

State law keeps assessment and remediation apart: the same company cannot do both on a property within 12 months. That is why many homeowners, landlords and property managers here hire an assessor first and a remediator second. Tell us in your request which one you are looking for.

Read the full guide: mold testing and inspection in Tallahassee.

Mold removal and cleanup for smaller areas

A patch on a bathroom ceiling, a closet wall or a window sill is often a smaller, faster job than a full remediation. Condensation, weak ventilation and a shower without a working fan are the usual causes. It is still worth finding out why it started. A spot that keeps coming back usually means moisture is getting in somewhere.

Larger areas fall under Florida's licensing rules, which we explain in our guide to Florida mold rules for Tallahassee homeowners and renters. In your request, give the room, the approximate size and whether it has returned, so the company can tell what kind of visit to schedule.

Read the full guide: mold removal in Tallahassee.

Attic, crawl space and HVAC mold

Many older Tallahassee homes sit on raised foundations with ventilated crawl spaces, and attics here can stay hot and humid for months. Mold in an attic often traces back to a roof leak or poor airflow. Crawl-space mold follows ground moisture and humid air, and HVAC mold shows up as a musty odor when the system kicks on or as water near the air handler. A clogged condensate line is a frequent cause.

Students and others who rent near FSU, FAMU or TCC should report these problems to the landlord in writing and keep a copy. Whether you own or rent, send us the details and an independent company will follow up with questions and a quote.

Start here: match your situation to a service

• A storm or leak just happened. Water comes first. Go to the water damage and mold guide, which has a 72-hour timeline.
• There is visible mold and the cause is known. See mold removal in Tallahassee.
• It smells musty but nothing shows. That is a job for testing and inspection.
• It is in the crawl space, attic or air handler. Say so in your request, since those areas need specialists.
• You rent near FSU, FAMU or TCC. Put it in writing to your landlord and read our Florida mold rules guide.
• You are unsure. Describe it and we will route it.

What happens between your request and a finished job

1. Request. You give a ZIP code and describe what you found.
2. Routing. We pass it to independent Tallahassee-area companies that say they employ licensed Florida mold professionals.
3. First contact. A company calls or texts. We cannot promise a response time, so phone if the situation is urgent.
4. Site visit and estimate. Expect questions about the history of the problem, and a written scope.
5. Your decision. Compare what you are told. Nothing obliges you to hire anyone.
6. Contract and scheduling. Mold assessment and remediation contracts in Florida must be written or electronic and signed.
7. Work and check. The job is carried out, and some homeowners ask an independent assessor to look afterward.

Typical combinations

• Storm damage: mitigation to dry the structure, then an inspection for hidden growth, then removal if needed.
• Unexplained odor: an assessor documents the problem, separate remediators bid on the scope, and the assessor can re-check.
• Small surface mold: clean, correct the ventilation or humidity cause, and monitor.

Because Florida separates assessment from remediation on the same property within 12 months, you will often work with two different companies.

Common mistakes we would help you avoid

• Painting or bleaching over a stain before the source is found.
• Cleaning without addressing the moisture, which brings the mold back.
• Letting a door-to-door crew after a storm talk you into signing on the spot.
• Paying a big deposit before a written scope exists.
• Assuming a landlord will act without written notice.

How price and scheduling usually work

We do not set prices; the company that contacts you provides a quote after looking at the job. The main drivers are the size of the affected area, what materials are involved, how hard the space is to reach, the containment and air filtration needed, and the repairs required to stop the moisture. Small jobs can wrap up in a day or two, while larger projects take longer because drying and containment take time.

Before you hire a mold company

• Check the license on MyFloridaLicense.com. Assessor and remediator licenses are issued separately.
• Get the scope and price in writing and compare at least two bids.
• Ask for proof of insurance.
• Do not hand over a large deposit before work is scheduled, and photograph the area before and after.

Learn how this referral service works on our about page, or check the Leon County areas we cover.

Frequently asked questions

Is there a charge to submit a request?

None. Quotes come from whichever independent company contacts you.

Are you a mold company?

No. We are a referral service and do not hold a Florida mold license or perform assessment or remediation.

How are companies selected?

We pass requests to independent companies that say they employ licensed Florida mold professionals. We cannot guarantee anyone's work, so confirm licenses and insurance at MyFloridaLicense.com.

Can I talk to more than one company?

Yes. You are free to compare, and to contact others yourself.

What happens to my details?

They go to the independent companies that may contact you. Read the privacy policy.

Do you cover the towns around Tallahassee?

We take requests from Leon County and the neighboring Big Bend counties. See the areas we serve.